Can skim coats be placed over wood flooring?
As long as the floor is solid. We recommend double 3/4 inch plywood glued and screwed at about every six inches. After the wood is primed we like to use an fiber reinforced underlayment. From this point many overlay and epoxy applications are available.
Does my concrete floor need to be maintained?
Yes, properly sealed concrete will require some maintenance, water and a light soap will be fine for normal use. For high traffic areas I always recommend wax. This will give protection to your seal coat. There are specific cleaners that are designed to care for decorative concrete floors, when mixed with a bucket of water, clean up is a snap. High traffic businesses, like restaurants and bars, may want to commit to a maintenance contract with a local decorative concrete company. This will insure the original beauty of the floor.
Can cracks be repaired so that they don't show through my skim coat?
Yes, there are many ways to repair cracks. Structural cracks that go to the bottom of the slab can be filled and repaired but there is no guaranty that these cracks won't resurface. We have several systems that repair cracks effectively.
Will dyes fade with sun exposure?
Yes dyes will fade, but a UV resistant urethane can be used over the decorative floor.
How can moisture emission be controlled in my basement?
By taking a calcium chloride test to determine moisture levels, a proper topcoat can be applied to the slab which blocks the passage of moisture vapor.
How do I maintain my concrete floor?
Surface Tone provides simple, clear instructions for concrete care on every type of installation. The level of foot traffic on your floor may require additional maintenance, such as a epoxy.
|
